Others
∫Others
1:Unreadable language was selected by mistake.
•Press the [MENU] button and select
[ 
] icon on the [ 
SETUP] menu to set the desired language.
2:The setting for the auto review function is disabled.
•Is the camera in burst mode (P48), auto bracket (P46) or motion image mode
[ 
] (P61), or is [AUDIO REC.] set to [ON]
–In these cases, you cannot set the auto review function in the [SETUP] menu.
3:A certain part of the picture blinks.
•This appears due to the highlight display function which shows white saturated areas. (P28)
4:When the shutter button is pressed halfway, a red lamp sometimes turns on.
•In dark places, the AF assist lamp (P78) lights red to make it easier to focus on a subject.
5:The camera will make sounds caused by internal mechanical movement when it is shaken.
•The sound arises when the lens moves. This is not a malfunction.
6:When the zoom lever is rotated, the camera makes a noise.
•When the zoom function is activated, you may hear some sound from the camera or the camera may shake. However, it is not a malfunction.
The sound is caused by automatic adjustment of the aperture.
It is not a malfunction.
8:The clock setting is reset.
•If you do not use the camera for a long time, the clock setting may be reset. When the message [PLEASE SET THE CLOCK] appears, set the clock again.
•When you take a picture before setting the clock, [0:00 0. 0. 0] is recorded.
9:Colors that were actually not around the subject appear on the picture.
•This camera compensates the color shift caused by the characteristic of the lens. However, the color shift may appear when you rotate the zoom lever to Tele, etc.
This is not a malfunction.
7:The lens clicks.
•When brightness has changed due to the zoom or the movement of the camera or other, the lens may click and the picture on the screen may be drastically changed, however, the pictures are not affected.
112
VQT0Q09
