
Recording pictures (basic)
Taking Pictures using the Built-in Flash
When you set the flash, you can take pictures using the
OPEN
ATo open the flash
Press the [ OPEN] button.
BTo close the flash
Press the flash until it clicks.
•Be sure to close the flash when not in use.
•The flash setting is fixed to Forced OFF [ ] while the flash is closed.
∫Switching to the appropriate flash setting
For the selectable flash settings, refer to “Available flash settings by recording mode” on P41.
: AUTO
The flash is automatically activated according to the recording condition.
: AUTO/Red-eye reduction
The flash is automatically activated according to the recording condition.
It reduces the
•The flash is activated twice. The first flash is activated only for a preparation of actual recording. The subject should not move until the second flash is finished.
•Use this when you take pictures of people in low lighting conditions.
: Forced ON
The flash is activated every time regardless of the recording condition.
•Use this when your subject is
: Forced
•The flash setting is set to Forced ON/
: Slow sync./Red-eye reduction
When you take a picture with a dark background landscape, this feature makes the shutter speed slow when the flash is activated, so that the dark background landscape will become bright. Simultaneously it reduces the
•Use this when you take pictures of people in front of a dark background.
: Forced OFF
The flash is not activated in any recording condition.
•Use this when you take pictures in places where the use of the flash is not permitted.
40
VQT0Q09