Panasonic DMC-SZ9 manual 208

Others

I would like to return the image in the WEB service to the camera.

•The images in the WEB Service cannot be saved (downloaded) to this unit. Do not delete the uploaded images, and make a backup of them.

I cannot display or delete the images uploaded to the WEB service by this unit.

•The images uploaded to the WEB service cannot be displayed or deleted by this unit.

>Perform the task using a smartphone/tablet or a PC.

Your “LUMIX CLUB” login ID and password were deleted after sending the camera in to be repaired.

•The settings stored in the camera may be deleted depending on the type of repair.

>Always make a copy of important settings.

There is an image that could not be transmitted.

•Is the size of the image too large?

>Divide the motion picture using [Video Divide] (P119).

>Reduce the size of the still picture, then transmit (P145, 161).

•Capacity or number of images in the WEB service is full.

>Login to “LUMIX CLUB”, and check the status of the destination on the WEB service link settings.

I have forgotten the password for the Wi-Fi.

>Execute the [Reset Wi-Fi Settings] in the [Setup] menu. (P52)

>However, all the information you have set on the [Wi-Fi Setup] menu, which includes the “LUMIX CLUB” login settings, will be reset. (excluding [LUMIX CLUB])

Transmission of the image fails midway.

•Is the size of the image too large?

>Transmit after dividing the motion picture with [Video Divide] (P119).

>Reduce the size of the still picture, then transmit (P145, 161).

>Image cannot be transmitted when the battery indicator is flashing red.

Motion picture cannot be transmitted.

•File format of the motion picture that can be sent differs depending on the destination. (P129)

•Is the size of the image too large?

>Transmit after dividing the motion picture with [Video Divide] (P119).

I cannot send images to an AV device.

•Sending may fail depending on the operational status of the AV device. Also, sending may take a while.

- 208 -