Panasonic DMC-SZ9 manual 157, When sending images to AV device

Wi-Fi

When sending images to AV device

Preparations:

When sending a picture to [Home], set your device to DLNA waiting mode.

•Read the operating instructions of your device for details.

When sending images to [External], the following are required:

•Registration to “LUMIX CLUB” (P163)

•Address number and access number acquired by the destination External AV device. (P167)

1 Press [Wi-Fi].

2Press 3/4/2/1 to select [New Connection], and then press [MENU/SET].

•When connecting with the setting you used before, you can select the connection destination from [History Connection] (P135) or [Favorite Connection] (P136).

3Press 3/4 to select [Send Images Stored in the Camera], and then press [MENU/

SET].

4Press 3/4 to select [AV device], and then press [MENU/SET].

5Press 3/4 to select [Home] or [External], and then press [MENU/SET].

6Press 3/4 to select connection method, and then press [MENU/SET].

[Via Network]	When you want to connect to an AV device via a wireless access point.
	(P138)
[Direct]	When you want to directly connect an AV device to this unit with [Wi-Fi

•This can be Direct], [WPS Connection], or [Manual Connection]. (P140) selected only

when [Home] is selected.

7Press 3/4 to select a device you want to connect, and then press [MENU/SET].

•When the connection is complete, the screen is displayed. To change the send setting, press [DISP.]. (P145)

8Press 3/4 to select [SINGLE] or [MULTI] and then press [MENU/SET].

•To change the setting or disconnect, press [Wi-Fi]. (P142)

9Select and send the images. (P153)

- 157 -