Panasonic DMC-SZ9 manual Set the language displayed on the screen, Rotate Disp, External Only

Basic

M[Rotate Disp.]

This mode allows you to display pictures vertically if they were recorded holding the camera vertically.

[ ] ([On]):

Rotate pictures on a TV and the LCD monitor so that they are displayed vertically.

[ ] ([External Only]):

Pictures are displayed vertically by rotating when played back on TV.

[OFF]

•Refer to P38 for information about how to play back pictures.

•When you play back pictures on a PC, they cannot be displayed in the rotated direction unless the OS or software is compatible with Exif. Exif is a file format for still pictures which allows recording information etc. to be added. It was established by “JEITA (Japan Electronics and Information Technology Industries Association)”.

•It may not be possible to rotate pictures that have been recorded with other equipment.

•Pictures are not rotated during Multi Playback.

[Version Disp.]

It is possible to check which version of firmware is on the camera.

•Press [MENU/SET] on the version display screen to display information about the software on the unit.

[Format]

The built-in memory or card is formatted. Formatting irretrievably deletes all the data so check the data carefully before formatting.

•Do not turn the camera off during formatting.

•If a card has been inserted, only the card is formatted. To format the built-in memory, remove the card.

•If the card has been formatted on a PC or other equipment, format it on the camera again.

•It may take longer to format the built-in memory than the card.

•If you cannot format, contact the dealer or Panasonic.

~[Language]

Set the language displayed on the screen.

•If you set a different language by mistake, select [~] from the menu icons to set the desired language.

- 54 -