Panasonic DMC-SZ9 139, Press 3/4 to select the encryption type, and press MENU/SET, Common Key

Wi-Fi

If you are not sure about the WPS compatibility (connecting by [Manual Connection])

Search for available wireless access points.

•Confirm encryption key of the selected wireless access point if the network authentication is encrypted.

•When connecting by [Manual Input], confirm SSID, encryption type, encryption key of the wireless access point you are using.

1Press 3/4 to select the wireless access point you are connecting to, and press [MENU/SET].

•Pressing [DISP.] will search for a wireless access point again.

•If no wireless access point is found, refer to “When connecting with [Manual Input]” on P139.

2(If network authentication is encrypted) Enter the encryption key.

•For details on how to enter characters, refer to “Entering Text” section on P80.

∫When connecting with [Manual Input]

1On the screen displayed in step 1 of “If you are not sure about the WPS compatibility (connecting by [Manual Connection])”, select [Manual Input] by pressing 3/4, then press [MENU/SET].

2Enter the SSID of the wireless access point you are connecting to, then select [Set].

•For details on how to enter characters, refer to “Entering Text” section on P80.

3Press 3/4 to select the network authentication type, and press [MENU/SET].

•For information on network authentication, see the manual of the wireless access point.

4Press 3/4 to select the encryption type, and press [MENU/SET].

•The type of settings that can be changed may vary depending on the details of network authentication settings.

Network authentication type	Encryption types that can be set
[WPA2-PSK]/[WPA-PSK]	[TKIP]/[AES]
[Common Key]	[WEP]
[Open]	[No Encryption]/[WEP]

5(When an option other than [No Encryption] is selected) Enter the encryption key and select [Set].

•Check the wireless access points instruction manual and settings when a saving wireless access point.

•If no connection can be established, the wireless access point’s radio waves may be too weak. Refer to “Message Display” (P196) and “Troubleshooting” (P200) for details.

•Transmission speed may decrease, or may not be usable depending on the environment it is used in.

- 139 -