Panasonic DMC-SZ9 Taking Close-up Pictures AF Macro/Macro Zoom, Enlarge when taking the picture

Recording

Taking Close-up Pictures ([AF Macro]/[Macro Zoom])

Applicable modes:

This mode allows you to take close-up pictures of a subject, e.g. when taking pictures of flowers.

1 Press 4 [#].

2 Press 3/4 to select the item and then press [MENU/SET].

		Item	Description of settings
[	]	([AF Macro])	You can take pictures of a subject as close as 5 cm (0.16 feet)
			from the lens by rotating the zoom lever upmost to Wide (1k).
			Use this setting to get close to the subject and then further
			enlarge when taking the picture.
			You can take a picture with the Digital Zoom up to 3k while
[	]	([Macro Zoom])	maintaining the distance to the subject for the extreme Wide
			position [5 cm (0.16 feet)].

•The image quality is poorer than during normal recording.

•Zoom range will be displayed in blue. (digital zoom range)

[OFF] j

•We recommend using a tripod and the Self-timer.

•We recommend setting the flash to [Œ] when you take pictures at close range.

•If the distance between the camera and the subject is beyond the focus range of the camera, the picture may not be properly focused even if the focus indication lights.

•When a subject is close to the camera, the effective focus range is significantly narrowed. Therefore, if the distance between the camera and the subject is changed after focusing on the subject, it may become difficult to focus on it again.

•Macro Mode gives priority to a subject close to the camera. Therefore, if the distance between the camera and the subject is far, it takes longer to focus on it.

•When you take pictures at close range, the resolution of the periphery of the picture may decrease slightly. This is not a malfunction.

•It is not possible to set AF Macro Mode in the following cases.

–In all Scene Modes except [3D Photo Mode]

•[Macro Zoom] cannot be set in the following cases.

–[Toy Effect]/[Miniature Effect] (Creative Control Mode)

–Scene Mode

–When [AF Mode] is set to [ ]

–When [Burst] in the [Rec] menu is set to [ ] or [ ]

- 62 -