- 13 -
Preparation
The AC adaptor (optional) can only be used with the
designated Panasonic DC coupler (optional). The AC
adaptor (optional) cannot be used by itself.
1Open the card/battery door.
2Insert the DC coupler, being careful of the direction.
3Close the card/battery door.
Ensure that the card/battery door is closed.
4Open the DC coupler cover A.
5Plug the AC adaptor into an electrical outlet.
6Connect the AC adaptor B to the [DC IN] socket C of
the DC coupler.
D Align the marks and insert.
Ensure that only the AC adaptor and DC coupler for this
camera are used. Using any other equipment may cause
damage.
Always use a genuine Panasonic AC adaptor (optional).
Some tripods cannot be attached when the DC coupler is connected.
Make sure to unplug the AC adaptor when you open the card/battery door.
If the AC adaptor and DC coupler are not necessary, then remove them from the digital camera.
Also, please keep the DC coupler cover closed.
Also read the operating instructions for the AC adaptor and DC coupler.
When using an AC adaptor, ensure that the Panasonic DC coupler (optional) and AC
adaptor (optional) are used.