- 60 -
Recording
Available Flash Settings in Recording Mode
The available flash settings depend on the Recording Mode.
(±: Available, —: Not available, ¥: Scene Mode initial setting)
¢[ ] is displayed.
The flash setting may change if the Recording Mode is changed. Set the flash setting again if
necessary.
The flash setting is memorised even if the camera is turned off. However, the Scene Mode flash
setting is reset to the initial setting when the Scene Mode is changed.
Flash will not be activated when recording motion picture.
The available flash range
Shutter speed for each flash setting
¢1Varies according to the settings of [Min. Shtr Speed] and [Sensitivity].
¢2When [Min. Shtr Speed] is set to [AUTO]. Varies according to the [Sensitivity] setting.
¢3When [ ] in [Sensitivity] is set.
¢2, 3: The shutter speed becomes a maximum of 1second in the following cases.
When the Optical Image Stabiliser is set to [OFF].
When the camera has determined that there is very little jitter when the Optical Image Stabiliser is
set to [ON].
In Intelligent Auto Mode, shutter speed changes depending on the identified scene.
In Scene Mode, shutter speed will be different from the above table.
‡ ‰ Œ
±¢———±
±±±±±
* + : ; ±¥±±
, / ï 5 ————¥
-¥±±
.———¥±
1 í 9 ±±¥
¥±±±
Wide Tele
[AUTO] in
[Sensitivity] 60cm (2.0 feet) to 4.1 m (13 feet) 1.5m (4.9 feet) to 2.1 m (6. 9 feet)
Flash setting Shutter speed (Sec.) Flash setting Shutter speed (Sec.)
1/60¢1 to 1/1600
1¢1 to 1/1600
1 or 1/8 to 1/1600¢2
1 or 1/4 to 1/1600¢2, 3
‰Œ