Wi-Fi

Performing smart transfer

Preparation: Configure [Smart Transfer] in advance. (P159)

1Turn off the camera.

2(When using a power outlet)

Connect the AC adaptor (supplied) and this camera with the USB connection cable (supplied), and insert the AC adaptor (supplied) into the power outlet.

(When using a PC)

Connect this unit to a PC by using the USB connection cable (supplied).

[Smart Transfer] starts automatically according to the [Charge Priority] (P162) setting.

[Smart Transfer] is not available when the memory card is locked.

Depending on the specifications of the PC, [Smart Transfer] may fail.

Except at the ambient temperatures between 0 oC and 40 oC (32 oF and 104 oF), [Smart Transfer] may not work.

When [Destination] is set to [PC], images are saved in the folder you have created for receiving. (P147)

If there are images that are not transferred when [Auto Transfer] is set to [OFF], the message that confirms whether to transfer these images is displayed. Select a desired option.

Transfer images instantly

Preparation: Configure [Smart Transfer] in advance. (P159)

1Connect the AC adaptor (supplied) and this camera with the USB connection cable (supplied), and insert the AC adaptor (supplied) into the power outlet.

Switch to Playback Mode.

2Select [Wi-Fi Setup] in the [Wi-Fi] menu, and press [MENU/SET]. (P44)

3Press 3/4 to select [Smart Transfer], and press [MENU/SET].

4Press 3/4 to select [Transfer Now], and press [MENU/SET].

Confirmation screen is displayed. It is executed when [Yes] is selected. Exit the menu after it is executed.

- 160 -

Page 160
Image 160
Panasonic DMC-SZ9 manual 160, Performing smart transfer, Preparation Configure Smart Transfer in advance. P159