Network settings
These settings are used if you will connect this unit to the Internet. ≥The connection to the Internet may take time or the Internet may not be
connected depending on the connection environment. (> 35) It is required that you use a broadband connection.
Preparation
≥Connect to a broadband network. (> 16)
Testing of “IP Address/DNS Settings”
Always test the connection when a LAN cable is connected.
1 Press [SETUP]. |
|
2 Press [3, 4] to select “Network” | |
and press [OK]. |
|
3 Press [3, 4] to select “IP Address/ | |
DNS Settings” and press [OK]. | |
4 Press [3, 4] to select “Connection | |
Test” and press [OK]. | |
IP Address/DNS Settings |
|
Connection Test | |
IP Address Auto Configuration (DHCP) | On |
IP Address | 㪄 㪄 㪄 㪅 㩷 㪄 㪄 㪄 㪅 㩷 㪄 㪄 㪄 㪅 㩷 㪄 㪄 㪄 㩷 |
Subnet Mask | 㪄 㪄 㪄 㪅 㩷 㪄 㪄 㪄 㪅 㩷 㪄 㪄 㪄 㪅 㩷 㪄 㪄 㪄 㩷 |
Default Gateway | 㪄 㪄 㪄 㪅 㩷 㪄 㪄 㪄 㪅 㩷 㪄 㪄 㪄 㪅 㩷 㪄 㪄 㪄 㩷 |
DNS Auto Configuration (DHCP) | On |
Primary DNS | 㪄 㪄 㪄 㪅 㩷 㪄 㪄 㪄 㪅 㩷 㪄 㪄 㪄 㪅 㩷 㪄 㪄 㪄 㩷 |
Secondary DNS | 㪄 㪄 㪄 㪅 㩷 㪄 㪄 㪄 㪅 㩷 㪄 㪄 㪄 㪅 㩷 㪄 㪄 㪄 㩷 |
Auto Detect Connection Speed | On |
Connection Speed Setting | |
OK |
|
RETURN |
|
“Testing”: | The test is in progress. |
“Pass”: | The connection is completed. |
| Press [RETURN] to exit. |
“Fail”: | Please check the connection and settings. (> 38) |
≥Please perform the “Connection Test” when any changes are made to the “IP Address/DNS Settings”.
≥If the connection test fails, it may be necessary to set the MAC address of this unit at the router side. The MAC address can be displayed by pressing [SETUP] and selecting “Network”.
Network
IP Address/DNS Settings
Proxy Server Settings
Network Service
MAC Address:
OK
RETURN
Setting the IP address
In most cases, default settings can normally be used without |
|
making any changes. | started |
Set the IP address only when the router has no DHCP server | |
functions or when the router’s DHCP server function is disabled. |
|
After performing steps | Getting |
4 Press [3, 4] to select “IP Address | |
Auto Configuration (DHCP)” and |
|
press [2, 1] to select “Off”.
5Press [3, 4] to select “IP Address”, “Subnet Mask” or “Default
Gateway” and press [OK].
6Enter numbers with the numbered buttons and press [OK].
7Press [2, 1] to select “Yes” and press [OK].
≥After checking the specifications for your broadband router, enter each number. If the number is unknown, then check the number of other devices such as personal computers connected via a LAN cable. Assign a different number from those of other devices for the “IP Address” and the same number for others.
≥If a wrong number is entered, then press [CANCEL].
≥The numeric input range is between 0 and 255.
Setting the DNS-IP
In most cases, default settings can normally be used without making any changes.
When setting an assigned DNS server from your Internet service provider, perform the following settings.
After performing steps
4Press [3, 4] to select “DNS Auto
Configuration (DHCP)” and press [2, 1] to select “Off”.
5Press [3, 4] to select “Primary DNS” or “Secondary DNS”and press [OK].
6Enter numbers with the numbered buttons and press [OK].
Primary DNS
Please input Primary DNS and press
[OK]. Press [CANCEL] to delete the selected character. To clear this setting, delete all characters and press [OK].
192 | . | 1 |
| . |
| . |
0 - 9 | Number |
7Press [2, 1] to select “Yes” and press [OK].
≥Follow the instructions given by your Internet service provider and enter the numbers. If the number is unknown, then check the number of other devices such as personal computers connected via a LAN cable and assign the same number.
≥If a wrong number is entered, then press [CANCEL]. ≥The numeric input range is between 0 and 255.
17
RQT9412
