RQT9412
33
To select these options, perform steps 1–4 (>32)
“Audio”Dynamic Range Compression [BD-V] [AVCHD] [DVD-V]
(Dolby Digital, Dolby Digital Plus and Dolby TrueHD only)
Change the dynamic range (>50) for late night viewing.
≥On ≥Off
≥Auto: Effective only when Dolby TrueHD is played.
Digital Audio Output (>8)
≥Press [OK] to show the following settings.
Dolby D/Dolby D +/
Dolby TrueHD
Select whether Dolby Digital, Dolby
Digital Plus, Dolby TrueHD, DTS Digital
Surround, DTS-HD High Resolution
Audio or DTS-HD Master Audio is output
in “Bitstream” or “PCM” format.
≥Not making the proper settings may
result in noise.
≥If the unit is connected with the
HDMI AV OUT terminal, the
specifications of the connected
equipment take preference over this
unit and audio selected in these
items may not be output (e.g., when
a television is connected, the HDMI
audio output of this unit is limited to
down-mixed 2ch.)
≥Bitstream:
Select “Bitstream” when the connected equipment can decode the
respective audio format.
–Connect equipment supporting HDMI (High Bit rate Audio) and use a
High Speed HDMI Cable in order to output high bit rate audio such as
Dolby Digital Plus, Dolby TrueHD, DTS-HD High Resolution Audio or
DTS-HD Master Audio.
≥PCM:
Select “PCM” when the connected equipment cannot decode the
respective audio format.
Refer to the operating instructions for connected devices to verify whether or
not they can decode each of the audio formats.
DTS/DTS-HD
BD-Video Secondary Audio [BD-V]
Turn on/off the button click sound on the menu and audio with
secondary video in picture-in-picture mode. (>23)
≥On: The primary audio and secondary audio are mixed and output. The
sampling frequency is converted to 48kHz.
≥Off: The button click sound on the menu and secondary audio are not
output.
PCM Down Conversion
Select how to output audio with a sampling frequency of 96 kHz.
≥Signals are converted to 48 kHz despite the settings across in
the following cases:
–when the signals have a sampling frequency of 192 kHz
–when the disc has copy protection
–when “BD-Video Secondary Audio” is set to “On”
≥On: Signals are converted to 48kHz. (Choose when the connected
equipment cannot process signals with sampling frequency of
96kHz.)
≥Off: Signals are output as 96kHz. (Choose when the connected
equipment can process signals with sampling frequency of
96kHz.)
Downmix
Switch the downmix system for playing back multi-channel
surround sound.
≥When “Dolby D/Dolby D +/Dolby TrueHD” or “DTS/DTS-HD” is
set to “Bitstream”, there are no downmix effects for the outputted
audio.
≥The audio will be outputted in “Stereo” in the following cases:
–AVCHD playback
–Playback of button click sound on the menu and audio with
secondary video in picture-in-picture mode
≥Stereo: When connected to equipment (e.g., TV) that does
not support the virtual surround function.
≥Surround encoded: When connected to equipment that supports the
conversion from 2 channels to multi channel
surround.
“Display”Status Messages
Choose whether to show status messages automatically.
≥Automatic ≥Off
On-screen Language
Choose the language for these menus and on-screen messages.
≥English ≥Français ≥Español
Screen Saver Function
This is to prevent burn-in on the screen.
≥Regardless of the setting, the screen switches to Screen Saver
mode if there is no operation for 2 minutes after starting the
playback of CD or MP3. (Playback continues.).
≥On: (Screen Saver Function is enabled after 10 minutes of no activity)
–When the movie title being played was created in 4:3 display mode the
masked-off area on the screen becomes gray to prevent screen burning.
(The screen saver will not be activated if the movie was created in 16:9
display mode.)
[When connecting with an HDMI cable, “TV Aspect” (>34) is set to “16:9”
and “HDMI Resolution” (>34) is set to any mode other than “480p”, or
when connecting with a component video cable, “TV Aspect” (>34) is set
to “16:9” and “Component Video Resolution” (>34) is set to “720p” or
“1080i”.]
–When the Direct Navigator or FUNCTIONS menu is displayed, the
display returns to the screen saver mode.
–When still pictures are shown (except for slideshow), the display returns
to the Direct Navigator screen.
≥Off
FL Display
Changes the brightness of the unit’s display.
≥Bright
≥Dim: The display is dimmed.
≥Auto: The display is dimmed during playback and is bright
except during playback.
SD Card LED Control
Set the lighting method for the lamp on the SD card slot. ≥On ≥Off
≥SD inserted: When this unit is turned on and SD card is inserted, the
lamp is lighted.
License Information about the software used by this unit is displayed.
Settings
DMP-BD70V-RQT9412_ENG.book 33 ページ ２００９年２月２７日 金曜日 午後７時２３分