Playing a video cassette [VHS]
Other operations of Video cassette
(These functions may not work depending on the recording conditions.)
About basic play D 20, “Basic play (Playing video contents)”
STOP Stop
PAUSE | Pause or Slow playback | ||
| |||
|
|
|
|
|
|
|
|
Pause
Press [;] again or [1] (PLAY) to restart play.
≥Pause is automatically canceled after 5 minutes.
Slow playback
Press [;] and hold for about 2 seconds.
≥Press [1] (PLAY) to revert to normal playback speed. ≥There will be no audio output.
≥Slow playback is automatically canceled after 10 minutes.
SLOW/SEARCH Fast-forward/Rewind or Cue/Review
While stopped, press [6] or [5].
Cue/Review
While playing, press [6] or [5] (or press and hold). ≥Each press changes the speed.
Normal mode | : Approx. 9 times <> Approx. 13 times |
3 times, 5 times mode : Approx. 27 times <> Approx. 43 times ≥Press [1] (PLAY) to revert to normal playback speed.
≥Hold [6] or [5] to start cue/review and release the button to restart normal playback.
≥Cue and review are automatically canceled after 10 minutes.
VHS Index Search System (VISS)
The index search function makes use of the index signals recorded on the cassette to help you find the beginning of a desired program quickly and easily.
While stopped or during normal play, press [:] or [9]. ≥Each press increases the number of skips.
≥Press [∫] to cancel the search.
≥Up to 20 index signals can be searched in either direction.
OK 
Frame-by-frame
While paused, press [1] (;1). Each press shows the next frame.
≥Press and hold to change in forward succession.
≥Press [1] (PLAY) to revert to normal playback speed.
≥It cannot go in reverse direction.
S-VHS Quasi Playback (SQPB)
This unit can play tapes recorded in
≥Some picture noise may occur depending on the type of tape used.
≥It is not possible to fully obtain the high resolution
26
Changing audio during play
You can change the audio type each time you press the button.
Normal audio | |
AudioLR>AudioL>Audio R>Audio | |
} | |
Screen Aspect
When black bars are shown at the top, bottom, left, and right sides of the screen, you can enlarge the image to fill the screen. (> 21)
STATUS Status messages
The status messages give you information about what is currently being played. Each time you press [STATUS], the information displayed will change.
e.g., | VHS drive indicator Play status | ||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| VHS cassette |
| |
|
|
|
|
|
|
| Play |
| |
No | display |
|
|
|
|
|
|
| |
|
|
|
|
|
|
| |||
|
|
|
|
|
|
| |||
|
| Elapsed time in the title | |||||||
|
|
|
|
| |||||
|
|
|
|
| |||||
|
|
|
|
|
|
|
| ||
|
| | 0:05.14 SP | ||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording mode
SP:Standard play mode
LP:2 times the length of SP mode
EP:3 times the length of SP mode
VP:5 times the length of SP mode
≥Press [CANCEL] to reset the tape counter (elapsed time) to “0:00.00”. The tape counter is automatically reset when inserting a video cassette.
Adjusting the playback picture
Manual Tracking
The unit usually makes tracking adjustments automatically, but you may need to do it manually if noise appears.
However, automatic adjustment may take longer, or adjustment may not be possible depending on the cassette.
In such cases, adjust it manually.
While playing, press
Repeat until the picture noise disappears.
≥Press
≥To eliminate noise for paused images or during slow playback, adjust the tracking while playing back in slow playback.
Vertical Locking Adjustment
Adjust the vertical synchronization to stop the picture from shaking while paused.
While paused, press
Repeat until the shaking stops.
≥Press
≥This function may not work with some tapes.
≥The playback picture may be unstable during special playback (Pause, Slow playback, Cue/Review).
When you play back a tape recorded in other than the SP mode, the picture and the sound may be unstable.
However, these are not a malfunction.
≥Tapes are automatically rewound once they reach the end (except during fast forwarding, etc.).
RQT9412
