Panasonic DVD-LV57 Power supply, Insert the battery, Operation range, Using the AC adaptor

	Preparing the remote
Started	control
	Insert the battery
Getting
	(Lithium battery)

2

13

Face + upwards.

∫Replacing the button-type battery The battery normally lasts for about a year. Replace if the remote control fails to operate the unit when used within the operation range.

Note

Refer to “IMPORTANT SAFETY INSTRUCTIONS” on pages 6 and 7.

Operation range

Power supply

Using the AC adaptor

DC IN 9V

% DC IN 9 V

1	This unit (Left side)
	Household AC
	outlet
	(AC 120 V, 60 Hz)

2

The [Í] indicator lights.

Front of this unit

Note

Remote control signal sensor

About 7 m (23 feet) in front of the

signal sensor

Note

30°� 30°�

Refer to “IMPORTANT SAFETY INSTRUCTIONS” on page 6.

The unit is in the standby condition (the [Í] indicator lights) when the AC adaptor is connected. The primary cir- cuit is always “live” as long as the AC adaptor is connected to an electrical outlet.

≥Do not expose the remote control signal sensor to bright light.

≥Do not place obstacles between the remote control signal sensor and the remote control.

10 ≥Do not use another unit’s remote control RQT6077 at the same time.

∫When the unit is not going to be used for a long time

The unit consumes 2 W when in standby mode.

To conserve power, disconnect the AC adaptor from the AC outlet.