Panasonic DVD-LV57 operating instructions Resume function

DVD VCD CD

Note

≥If “$” appears on the screen

≥The operation is prohibited by the unit or disc.

≥When the disc ends

≥If you have finished using the unit, turn it off to conserve power (➡ page 14, “To turn the unit off”).

≥The surface of the unit may become warm if it is used for a long time, but this is normal and not an indication of mal- function.

≥The disc is still spinning while a menu is on screen. Press [∫] if you have finished viewing.

≥The [Í] indicator on the unit flashes to indicate the unit is on when the monitor’s mode is set to “4 (Off)” (➡ page 21) or the outer cover is closed.

≥You cannot use the remote control to turn the unit on when it is being pow- ered by the battery pack.

≥To prevent accidental operation

HOLD

Slide [HOLD] to the left.

≥In the hold mode, the unit does not respond when you press the buttons. If you press a button in the hold mode, “'” appears on the unit’s display and the [Í] indicator flashes.

≥To release:

Resume function

The position you stopped play at is recorded by the unit when the “RESUME” indicator lights on the unit’s display.

RESUME

While “RESUME” indicator lights on the unit’s display, press [1] (play) to start play from where you stopped it (Resume function).

DVD

The following display also appears.

Press PLAY to Preview Chapters

Pressing [1] (play) while the message is displayed, the beginning portions of each chapter up to the current one are played and full play resumes from the point where you stopped play. (Chapter Preview) (Chapter Preview feature works only within a title.)

If you do not press [1] (play), the mes- sage disappears and play starts from where you stopped it.

∫To cancel Press [∫].

Basic Operations

≥Slide [HOLD] to the right.

Note

≥The resume function does not work if the disc’s play time is not displayed.

≥It is cleared if you open the disc lid.

Playing CD-R and CD-RW

This unit can play CD-DA (digital audio) and video CD format audio CD-R and CD-RW that have been finalized§ upon completion of recording.

It may not be able to play some CD-R or CD-RW due to the condition of the recording.

§Finalizing is a process that enables CD-R/CD-RW players to play audio CD-R and CD-RW.

15

RQT6077