11
Answering a Call To receive a call, the phone must be switched
on and the signal strength meter ( ) must be
displayed.
Press any key except D to answer a call
or
Press D to reject a call
Caller Identification This feature allows you to identify incoming calls.
The caller’s phone number, and name if stored in the Phonebook, will be dis-
played during an incoming call.
Volume Control The volume level may be adjusted during a call:
Use 5 to decrease the volume; use 1 to increase the volume
Note: If a call is not answered or is rejected, the number of incoming calls
missed will be displayed. Press any key to clear the display.
Note: Caller Identification may not always be available.
Note: Volume control for the Personal Handsfree accessory is adjusted in
the same manner.
jam-eng.book Page 11 Tuesday, March 9, 2004 1:06 PM