80
DTMF Tones Dual Tone Multi-Frequency Tones (DTMF) tones can be sent during conversa-
tion. These are often used to access voice mail, paging and compu terized
home banking services. For example, you may need to input a number to
remotely access voice mail messages. A phone number may be stored in the
Phonebook with DTMF tones, allowing the number to be dialed upon recall
and the DTMF tones to be sent automatically.
Sending DTMF Tones During a Call
Simply enter digits (# to ,, ! and ") during a call.
Pause Dia l
Pause Dialing allows you to send DTMF tones automatically.
1 Enter phone number
2 Press and hold # until a “p” is displayed a t the end of the ph one n um-
ber entered
3 Enter DTMF dig its a fter the p ause , e.g . ent er t he nu mber to ac cess voice
mail messages
4 Press C
After the call is connected, DTMF tones will be sent after 3 seconds.
Wait Dialing
Wait dialing requires you to press the Send Key to transmit the DTMF tones
instead of sending them automatically.
1 Enter the phone number
2 Presss and hold # until a “w” is displayed
3 Enter DTMF digits after the wait, e.g. enter the number to access voice
mail messages
4 Press C to make the call
5 After the call is connected, when prompted for password, press C to
transmit DTMF tones
jam-eng.book Page 80 Tuesday, March 9, 2004 1:06 PM