150
VQT1Z09
VIERA Link does not
work. [Setting on this unit]
≥Connect with a HDMI mini cable (optional). (l112)
≥Press the MENU button, then touch [SETUP] #
[VIERA Link] # [ON]. (l112)
≥Turn the power to the unit off and then back on again.
[Setting on other devices]
≥Depending on HDMI terminal of the TV, the input channel
may not switch automatically. In this case, use the remote
control for the TV to switch input. (For details on how to
switch input, please read the operating instructions for the
TV.)
≥Check the VIERA Link setting on the connected device.
≥Set the setting to control th e VIERA Link of the TV to [Off]
once, and the back to [On] again. (Refer to the operating
instructions of the TV for details.)
When connected by the
USB cable, this unit is not
detected by the PC.
≥Select another USB terminal on the PC.
≥Check the operating environment. (l128)
≥Connect the supplied USB cable again after restarting the
PC and turning on this unit again.
When the USB cable is
disconnected, an error
message will appear on
the PC.
≥To disconnect the USB cable safely, double-click the
( ) icon in the task tray and follow the instructions on the
screen.
The power of the DVD
burner cannot be turned
on.
≥When the unit is connected to the DVD burner, use the
respective AC adaptors for both this unit and the DVD
burner.
Cannot see the PDF
operating instructions for
HD Writer AE 1.0.
≥You will need Adobe Acrobat Reader5.0 or later or Adobe
Reader 7.0 or later to read the PDF operating instructions
for HD Writer AE 1.0.
Cannot copy scenes on
the SD card by
connecting to other
equipment with the USB
cable.
≥Other equipment might have not recognized the SD card.
Unplug the USB cable once, and reconnect it.
Problem Check points
HDCSD300&HS300P-VQT1Z09_eng.book 150 ページ ２００９年１月２１日 水曜日 午前９時５３分