71
VQT1Z09
Function Effect/Setting method
Guide line You can check if the image is level while recording or playing
back motion pictures and still pictures. The function can also
be used to estimate the balance of the composition.
Change the mode to or .
The Intelligent Auto Mode is set to off. (l47)
Select the menu. (l33)
[RECORD SETUP] # [GUIDE LINES] # desired setting
It is possible to set from the quick menu. (l34)
When motion picture playback is selected while the mode is set to
. (l87)
[VIDEO SETUP] # [GUIDE LINES] # desired setting
The guide lines do not appear on the images actually recorded.
Set to [OFF] to cancel the guide line.
Interval recording A scene that moves slowly for long period of time is recorded
frame by frame with an interval, and is recorded as a short time
motion picture.
A frame is recorded with a set recording interval.
24 frames will make up motion picture of 1 second.
Change the mode to .
Select the menu. (l33)
[RECORD SETUP] # [TIME LAPSE REC] # desired setting
It is possible to set from the quick menu. (l34)
This allows you to select from [1SECOND]/[10 SECONDS]/
[30 SECONDS]/[1 MINUTE]/[2 MINUTES]
[OFF] : Interval recording is not set.
appears on the screen.
After recording, the setting of interval recording is canceled.
Audio cannot be recorded.
Maximum recordable time is 12 hours.
Use the AC adaptor for a long recording to free you from worrying
about the battery running down.
Setup
example
Setup time
(recording
interval)
Recording
time Recorded time
Sunset 1 sec 30 min–1 h 1min15sec–
2 min 30 sec
Blooming 30sec 1 h–3 h 5 sec–15 sec
HDCSD300&HS300P-VQT1Z09_eng.book 71 ページ 2009年1月21日 水曜日 午前9時53分