52
VQT1Z09
4Press the recording start/stop
button to start recording.
≥While recording is in progress, the recording
will not stop even if the LCD monitor is closed
and the viewfinder is retracted.
5Press the recording start/stop
button again to pause recording.
≥Still pictures can be recorded while recording the motion picture. (l57)
≥The images recorded between pressing the recording start/stop button to start recording and
pressing it again to pause recording become one scene.
≥Maximum number of recordable scenes: 3900
Maximum number of different dates: 200 (l91)
When either of them reaches to the maximum limit, additional scenes cannot be recorded.
(In the case of SD cards it is the maximum number of recordable scenes per card.)
≥A continuous recording of motion picture data that exceeds 4 GB may momentarily stop at every
4 GB of data when played back with another device.
≥Put the unit in Pause Mode when connecting or disconnecting an external microphone with the MIC
terminal.
∫Screen indications in the
recording mode
ARecording mode
BRemaining time left for recording
(When the remaining time is less than
1 minute, [R 0h00m] flashes red.)
CRecording time elapsed
Each time the unit is put into recording
pause, the counter display will be reset to
“0h00m00s”.
About the compatibility of the recorded motion pictures
≥They are not compatible with devices other than those that support AVCHD. Images cannot be
played with equipment that does not support AVCHD (ordinary DVD recorders). Confirm that your
equipment supports AVCHD by referring to the operating instructions.
≥There are some cases where the recorded motion pictures cannot be played back, even if the
device supports AVCHD. In such cases, play the recorded motion picture with this unit instead.
0h00m00s0h00m00s0h00m00s
R 1h20mR 1h20mR 1h20m
HG
HDCSD300&HS300P-VQT1Z09_eng.book 52 ページ ２００９年１月２１日 水曜日 午前９時５３分