32
VQT1Z09
Preparation
Setup 4How to use the touch screen
You can operate by directly touching the LCD monitor (touch screen) with your finger.
It is easier to use the stylus pen (supplie d) f o r detailed operation, or if it is hard to operate with your fingers.
∫Touch
Touch and release the touch screen to select
icon or picture.
≥Touch the center of the icon.
≥Touching the touch screen will not operate
while you are touching another part of the
touch screen.
∫About the Stylus pen
The stylus pen (supplied) can be stored on the
unit as shown when it is not being used. Remove
the stylus pen from the unit when it is to be used.
≥Only use the supplied stylus pen.
≥Do not tuck the stylus pen with the LCD
monitor.
∫About the operation icons
///:
These icons are used to switch between the
menu and thumbnail display page, for item
selection and setting etc.
:
Touch to return to the previous screen such
as when setting menus
≥Wipe the LCD monitor with a soft cloth, such
as eye glass cleaner, when it gets dirty with
finger prints etc.
≥Do not touch on the LCD monitor with hard
pointed tips, such as ball point pens.
≥Do not touch the LCD monitor with your finger
nails, or rub or press with strong force.
≥It may become hard to see or hard to
recognize the touch when the LCD protection
sheet is affixed.
≥Perform the touch screen calibration when the
touch is not recognized or wrong location is
recognized. (l42)
HDCSD300&HS300P-VQT1Z09_eng.book 32 ページ ２００９年１月２１日　水曜日　午前９時５３分