84
VQT1Z09
Shutter Speed:
Adjust it when recording fast-moving subjects.
Iris:
Adjust it when the screen is too bright or too dark.
≥Press the FUNCTION button. (l82)
1Touch [SHTR] or [IRIS].
≥When using the viewfinder, press the
FUNCTION button. (l82)
2Touch / to adjust settings.
≥When using the viewfinder, rotate the multi
manual ring and set it. (l82)
Shutter speed:
1/60 to 1/8000
≥If [AUTO SLOW SHTR] is set to [ON], the
shutter speed will be set between 1/30 and
1/8000.
≥If [DIGITAL CINEMA] is set to [O N], th e sh utte r
speed will be set between 1/48 and
1/8000. (When [AUTO SLOW SHTR] is set to
[ON], the range is 1/24 to 1/8000.)
≥The shutter speed closer to 1/8000 is faster.
≥The shutter speed will be set between 1/2 and
1/2000 in Still Picture Recording Mode.
Iris/Gain value:
CLOSE # (F16 to F2.0) # OPEN # (0dB to
18dB)
≥Value closer to [CLOSE] darkens the image.
≥Value closer to [18dB] brightens the image.
≥When the iris value is adjusted to brighter than
[OPEN], it changes to the gain value.
≥To return to auto setting, press the FUNCTION
button again. When using a viewfinder, press
the FUNCTION button to select the , rotate
multi manual ring to select [CANCEL], and
press the FUNCTION button again.
≥When setting both the shutter speed and the
iris/gain value, set the shutter speed and then
set the iris/gain value.
Manual shutter speed adjustment
≥When the shutter speed is set lower than 1/15
in the Still Picture Recording Mode, using a
tripod is recommended. Also, white balance
cannot be set. The shutter speed will be set to
1/30 when the power is turned on again or
when the quick start is performed.
≥If you increase the shutter speed manually, the
noise on the screen may increase.
≥You may see a band of light around an object
that is shining very bright, or highly reflective.
≥During normal playback, image movement
may not look smooth.
≥If you record an extremely bright object or
record under indoor lighting, color and screen
brightness may change or a horizontal line
may appear on the screen. In this case, record
in Auto Mode or set the shutter speed to 1/60
in areas where the power supply frequency is
60 Hz, or 1/100 in areas of 50 Hz.
Manual iris/gain adjustment
≥Luminance level and histogram are displayed
during the iris adjustment. (l76, 77)
≥If the gain value is increased, the noise on the
screen increases.
≥Depending on the zoom magnification, there
are iris values that are not displayed.
Manual shutter speed/iris adjustment
F
IRISSHTRWB
1/1001001/100
SHTR
IRIS
HDCSD300&HS300P-VQT1Z09_eng.book 84 ページ ２００９年１月２１日 水曜日 午前９時５３分