27
VQT1Z09
Important:
While the DC cable is connected to the AC adaptor, the battery will not charge.
Do not use the AC cable with any other equipment as it is designed only for this unit. Also, do
not use the AC cable from other equipment with this unit.
ADC output terminal
BDC input terminal
Insert the DC cable matching the [ ] mark of the DC input terminal.
1Connect the AC cable to the AC adaptor and the AC outlet.
2Connect the DC cable to the AC adaptor.
3Connect the DC cable to the DC input terminal [DC IN].
Make sure to set the mode to OFF and that the status indicator is turned off when disconnecting the
AC adaptor.

Connecting to the AC outlet

DC IN

HDCSD300&HS300P-VQT1Z09_eng.book 27 ページ 2009年1月21日 水曜日 午前9時53分