43
VQT1Z09
∫Adjusting the brightness of the
viewfinder
1Extend the viewfinder and open
the LCD monitor.
2Select the menu. (l33)
≥The viewfinder turns on.
3Touch [BRIGHTNESS].
4Touch / to adjust the
setting.
≥After adjustments are made if no operations
are performed for about 2 seconds, the bar will
disappear.
5Touch [ENTER].
≥Touch [EXIT] or press the MENU button to
complete the setting.
¬Change the mode to or .
Extend the viewfinder and rotate the
LCD monitor towards the lens side.
≥LCD monitor and viewfinder are turned on
during the face-to-face recording when the
viewfinder is extended.
≥The image is horizontally flipped as if you see
a mirror image. (However the image recorded
is the same as a normal recording.)
≥Record by viewing the image in the viewfinder
during the face-to-face recording.
≥Only some indications will appear on the
screen. When ° appears, return the direction
of the LCD monitor to normal position and
check the warning/alarm indication. (l141)
[SETUP] # [EVF SET] # [YES]
Recording showing the
contents to a partner
HDCSD300&HS300P-VQT1Z09_eng.book 43 ページ ２００９年１月２１日 水曜日 午前９時５３分