1Connect the unit to the recording equipment and

begin playback on the unit.

Recorded files can be dubbed while a slideshow is being played back. (l 127)

If the unit is connected to a video device using an AV cable, the screen of the unit will not display images when in Playback Mode. Check on the TV screen instead.

2Start recording on the connected device.

To stop recording (dubbing), stop playback on this unit after stopping recording on the recorder.

Even when [DISPLAY] is set to [OFF], the battery icon will be displayed if the battery runs low. Be sure to use a battery which has been charged sufficiently.

If the date and time display and function indication are not wanted, cancel them before dubbing. (l 66)

If the dubbed images are played back on a wide-screen TV, the images may be stretched vertically.

In this case, refer to the operating instruction of the device you are connecting to or read the operating instructions of the wide-screen TV and set the aspect ratio to 16:9.

- 154 -

Page 154
Image 154
Panasonic HX-WA03, HX-WA30, HXWA03H owner manual Start recording on the connected device, 154