Panasonic HXWA03H, HX-WA30, HX-WA03 owner manual 219

		Recording
Problem			Check points
The high	≥ The battery temperature or unit internal
temperature	temperature (excluding battery) rises. Wait
warning icon	for the temperature to drop before using the
is displayed and	unit again.
recording is not
possible.
When recording	≥ The field of view of the image displayed on
still pictures, the	the LCD monitor differs for motion picture
angle of view of	recording and still picture recording. At time
the image	of purchase, the recording standby screen
displayed on the	shows video view. Press the			button
LCD monitor	halfway to change to photo view. To change
changes.	the angle of view of the recording standby
	screen to photo view, set [PHOTO VIEW] to
			(ON). (l 104)
The unit arbitrarily	≥ Use an SD card that can be used for motion
stops recording.	picture recording. (l 30)
	≥ The recordable time may have shortened
	due to the deterioration of the data writing
	speed or repeated recording and deletion.
	Using the unit, format the SD card or built-in
	memory. (l 68)
Image not in focus	≥ Hold down the power button until the LCD
	monitor goes off and then turn the power on
	again. When [FOCUS] is set to
	(MANUAL), do the above, then reconfigure
	the Manual Focus.
There is noise in	≥ When the [ISO] setting is too high, noise
the recording	may appear in the recorded images. Please
image.	lower the ISO sensitivity setting. (l 106)

- 219 -