4 Open the LCD monitor.

 

The status indicator A will turn off and switch

to Recording Standby Status.

 

≥ If Quick Start standby mode has been set by

 

pressing the power button for a short time,

 

pressing any of the buttons on the unit will

 

set the status to Recording Standby Status.

 

Quick Start Standby Status will be unlocked after approximately 5 minutes and will switch to Standby Mode. If Quick Start Standby Mode is set during file transfer in Direct Mode (l 158) of the Eye-Fi card, the unit switches to Standby Mode in approximately 5 minutes after the completion of the file transfer.

If [ECONOMY] (l 66) is activated and the device switches to Quick Start Standby Status automatically, pressing any button on the unit will switch to Recording Standby Status.

Depending on the recording conditions and menu settings, time for Quick Start may be longer than 0.5 seconds.

It may take some time for Automatic White Balance to adjust.

- 64 -

Page 64
Image 64
Panasonic HX-WA30, HX-WA03, HXWA03H owner manual Open the LCD monitor