Panasonic HX-WA03, HX-WA30, HXWA03H Using Direct Mode, 158, Menu # Eye-Fi # Start Direct Mode

∫Using Direct Mode

The files can be transferred directly from the Eye-Fi card to a smartphone or tablet without going through the access point when necessary setting is performed in a PC in advance.

≥Install the software supplied with the Eye-Fi card on your PC, and configure the Direct Mode settings.

≥Insert the Eye-Fi card.

Select the menu.

[MENU]: 2

#[Eye-Fi] # [START DIRECT MODE]

≥An SSID and password are displayed. Confirm the displayed content, and press the SET button.

≥If any of the following operations are performed, the Direct Mode will be canceled.

jIf you turn the unit off

jClosing the LCD monitor, sending the unit into Standby Mode. jStarting motion picture or audio recording

The Direct Mode may be canceled by the Eye-Fi card for reasons other than the above.

≥In Direct Mode, the Economy Mode function (l 66) is disabled.

≥When [TRANSFER] (l 155) is set to [OFF], [START DIRECT MODE] cannot be selected.

≥The Eye-Fi transfer feature cannot be guaranteed to continue to operate in the future due to changes to the card specification etc.

≥Update the firmware of the Eye-Fi card to the latest one using the software supplied with the Eye-Fi card before use.

≥During an Eye-Fi transfer, the Economy Mode function (l 66) is disabled.

≥When the endless memory function of the Eye-Fi card is set to on, the files transferred from the card may be deleted automatically.

≥The Eye-Fi card may heat up as a result of the files being transferred.

≥When the Eye-Fi card is used, the battery will run down faster.

≥Audio files cannot be handled.

- 158 -