![](/images/backgrounds/211470/bgad.png)
- 173 -
4(When there is an Encryption key (Password))
Select [NEXT] using the SET button and then press
the SET button.
≥A message is displayed when the connection is complete.
∫When connecting by [Manual Setting]
1Select [INPUT] using the SET button and then press
the SET button.
2Enter the SSID of the wireless access point to be
connected using the SET button
≥For details on how to enter characters, refer to page 172.
≥When the entry is complete, select [ENTER] using the SET button and
then press the SET button.
3Select [NEXT] using the SET button and then press
the SET button.
4Select the desired Network Authentication method
using the SET button and then press the SET button.
≥When [WEP] is selected, proceed according to step 6.
Confirming that the Wi-Fi connection is complete
is displayed on the screen
When the preparations for the Wi-Fi function (l162) and the Wi-Fi
connection are complete, you can use the following functions:
j[LINK TO CELL] (l181)
j[DLNA PLAYBACK] (l185)
Network authentication type Encryption types that can be set
[Open] [WEP]/[NONE]
[WEP] There is no setup of an encryption
types.
[WPA-PSK]/[WPA2-PSK] [TKIP]/[AES]