- 202 -
∫To disconnect USB cable safely
Select the icon in task tray displayed on the PC, and then click
[Eject Panasonic Video Camera].
≥Depending on your PC’s settings, this icon may not be displayed.
≥Do not use any other USB cables except the supplied one. (Operation
is not guaranteed with any other USB cables.)
≥When this unit is connected to a PC using a USB cable while the unit is
turned on, power is also supplied from the PC to this unit.
≥When performing reading/writing between a PC and an SD card, be
aware that some SD card slots built into PCs and some SD card
readers are not compatible with the SD H C Memory Card or SDXC
Memory Card.
≥When using an SDXC Memory Card, check the following support site.
http://panasonic.net/avc/sdcard/information/SDXC.html
Use as a card readerConnect the unit to a PC and set the unit to Card Reader
Mode. (l201)
≥The LCD monitor will turn off.
≥The Smart wizard screen is automatically displayed when HD Writer
VE 3.0 is installed.
≥This unit is automatically recognized as an external drive of the PC.
(l203)
≥File is read from the SD card if one is inserted or the built-in memory if
no SD card is inserted.
≥When you select an option other than [CARD READER], reconnect the
USB cable.
About the status indicator of the unit
≥While the unit is connected to a PC, the status indicator flashes in
orange.
≥While the unit is accessing the SD card or the built-in mem or y, the
status indicator illuminates in red. During access, do not disconnect
the USB cable or remove the battery.