Component Identification
Exit substopper
Exit extension tray
Exit stopper
Document guide 
Hopper extension tray
Hopper
Front door release
Inside the front door.
Used for attaching the imprinter unit and ink cartridge.
An imprinter unit installed here is called a post- imprinter.
Connectors
Used to connect the scanner unit to the host computer.
AC inlet
Power cord 
Fan exhaust vent
Exit document guide
Power indicator
When the power is turned on, the green indicator lights.
When an error occurs, the indicator will change to red, and light steadily or flash.
Power switch
[ : on position
: off position
Display panel
When performing each setting, used to display the scanning conditions, etc.
Front door
Used for attaching the imprinter unit and ink cartridge.
An imprinter unit installed here is called a pre- imprinter.
ADF / manual feed selector
To prevent double feeding, adjust the selector to feed the scanning document properly.
Paper path selector
Used to change the scanning document’s path direction (front side/back side).
12