Secondary Settings
Selecting the paper path for scanned document
To select the front, set the paper path selector to the upper side.
To select a straight path pass through to the back, set the paper path selector to the lower side.
•When scanning documents with a thickness of 0.2 mm to 1 mm, like folded documents, set the paper path selector to straight.
Paper path selector
The paper path selector is located on the left side of the scanner.
Setting the ADF / manual feed selector
¥Single scanning
When scanning a single sheet or several | 2 1 | ADF ADJ. |
sheets, set the ADF / manual feed selector | 3 |
|
to “MANUAL”. | MANUAL | |
|
|
4 
¥Continuous scanning
When scanning normal paper continuously, set the ADF / manual feed selector to “2”.
ADF / manual feed selector
When scanning with smooth sided paper
or a paper jam occurs with normal paper, The ADF / manual feed selector is located on the left set the ADF / manual feed selector to “3”. side of the scanner.
When double feeding occurs frequently or scanning a document with a rough face as in NCR paper, set the ADF / manual feed selector to “1”.
When a jam occurs at the paper feed component, set the ADF / manual feed selector to “4”.
•The ADF / manual feed selector must be set in the chosen specific position for this setting to function properly.
•If double feed alarm beeps frequently, change the ADF / manual feed selector.
33