Replacing Consumables
If “Warning Replace Roller” message is displayed on the LCD, replace the paper feed roller module and retard roller module at the same time.
1 Turn the power off and unplug the power cord.
2 | Use your hand to pull towards you the |
front door release. |
Then open the front door completely.
Power switch
: off position
Front door
Front door release
3 | Place your finger on the paper feed | Paper feed roller block | |
roller block shaft and pull it towards | |||
| |||
| you to remove the paper feed roller |
| |
| block from the magnet. (1) |
| |
| Push down the green levers and |
| |
| remove the paper feed roller module | 1 | |
| from the scanner by holding the green | ||
|
| ||
| levers. (2) |
| |
| • The paper feed roller block is attached by |
|
a magnet.
•When moving the green levers, do not
apply pressure in any other direction |
|
than the arrows. | 2 |
They may break. | 2 |
| |
| Green levers |
41