Replacing Consumables
11 Hold the conveyor using both hands, and close the conveyor by pushing it into the unit.
•When the conveyor is closed, the click- stop mechanism will operate.
•If the conveyor is not closed correctly
and the operation in step 12 is done, the conveyor may break.
12 Close the front door.
• Push both sides of the front door down slowly until it clicks into place.
• After replacing rollers, clear the “Replace
Roll. Warning” display. (Refer to page 28.)
Before closing the front door, confirm that the conveyor is closed correctly. Or, the conveyor may break.
Conveyor
45