Component Identification

Exit substopper

Exit extension tray

Exit stopper

Document guide

Hopper

Hopper extension tray

Front door release

Inside the front door.

Post-imprinter door (Back door)

Used for attaching optional imprinter unit and ink cartridge.

An imprinter unit installed here is called a post-imprinter.

AC inlet

Power cord

Power cord shown on the figure is for 100–200 V.

Fan exhaust vent

USB connector

Used to connect the scanner unit to the host computer.

SCSI connector

Used to connect the scanner unit to the host computer.

Exit tray

Exit document guide

Power indicator

When the power is turned on, the green indicator lights. When an error occurs, the indicator will change to red, and light steadily or flash.

STOP/START button

Used to stop or start scanning a document.

Power switch

[: on position

± : off position

Front door

Pre-imprinter door (Exit tray)

Used for attaching optional imprinter unit and ink cartridge. An imprinter unit installed here is called a pre-imprinter.

ADF / manual feed selector

To prevent double feeding, adjust the selector to feed the scanning document properly. (Refer to page 17.)

Paper path selector

Used to change the scanning document’s path direction (front side/back side).

(Refer to page 17.)

10