Replacing Consumables
∫Replacing paper feed roller module
1Turn the power off and unplug the power cord.
2 Use your hand to pull the front door release towards you (1).
Then open the front door completely (2).
3 Place your finger on the paper feed roller block shaft and pull it towards you to remove the paper feed roller block from the magnet. (1)
Push down the green levers and remove the paper feed roller module from the scanner by holding the green levers. (2)
≥The paper feed roller block is attached by a magnet.
≥When moving the green levers, do not apply pressure in any other direction than the arrows.
They may break.
Power switch
± : off position
Front door 2
2
1
Front door release (Inside the front door.)
Paper feed roller block shaft
Green levers
27