Replacing Consumables

4 Open the optional “Roller Exchange Kit (KV-SS017)”, and take out the new paper feed roller module.

5 Install the new paper feed roller module with the gear on the left side and the bearings into the guide grooves of the side chassis in the scanner. (1)

Then push up the green levers on both ends until they click into place. (2)

≥Match the paper feed roller module with the bearings and guide grooves, and then attach it.

6 Push up on the paper feed roller block and it will magnetically attach to the chassis. (3)

≥When attaching the paper feed roller block to the chassis, do not damage the roller.

Caution:

Do not close the front door when the paper feed roller block is not installed completely, or the paper feed roller may be damaged.

≥To continue, replace the retard roller module according to the following procedure. (The retard roller module is located in the conveyor.)

Bearing

Side chassis

Green levers

Paper feed roller block

Green levers

28