Loading Documents
4 Place the documents on the hopper with the side to be scanned facing up. Then push them in the direction of the arrow until they stop.
≥Be sure to place the documents on the hopper as shown in the diagram at the right.
The amount of documents should not exceed the limit mark on the document guide. This may cause a paper jam or skew.
≥The scanning document size is different for the
≥For documents up to A4, letter or legal size, up to 300 sheets of 64 g/m2 (17 lbs.) paper can be placed at one time on the
hopper. For documents up to B4, A3 or ledger size, up to 200 sheets of 64 g/m2 (17 lbs.) paper can be placed.
Portrait
A4, LTR | Fill indicator |
| |
| (Limit mark) |
B4TA3
,LTR
A4
A3
B4T
A
The fill indicator illustration is only for the
≥Even with A4, letter and legal size docu- ments, the maximum number of sheets of paper which can be inserted when the documents are to be scanned in the land- scape mode is 200 which is the same number as for the B4, A3 and ledger size documents. (This is the number of sheets that comes up to the
≥Depending on the types of paper, the doc- ument may slip and not be fed smoothly. In such case, reduce the number of sheets of the document.
Landscape
A
5 Adjust the document guides to the size of the document to be scanned. Adjust the exit document guides to the size of the document to be output, if required.
Exit document guides
A
Document guides
15