Replacing Consumables
9 Take out the new retard roller module in the optional “Roller Exchange Kit
10 Pull the right side of the shaft in the direction of the arrow and hold it there. (1)
Attach the new retard roller module as shown in the diagram on the right (2) and then return the right side of the shaft in the direction of the arrow. (3)
≥Confirm if pin A and pin B are inserted in their notches correctly.
≥Attach the retard roller module so that the notch A is on the left side.
1
Shaft
Retard roller module
3 
2
Notch A
Pin A
Pin B
Notch B
When the pin is not inserted in the notch properly, it may cause double feeding or a paper jam.
30