Component Identification

∫Power turn-on sequence

1Turn on the power of the scanner.

≥The LED will now light.

2Turn on the power of the host computer after scanner’s LED stays green.

≥In case of the USB connection, the host computer recognizes the scanner auto- matically when the scanner is powered on even after the host computer is powered on.

LED

Power switch

∫About LED

LED indicates the status of the scanner as follows:

LED light

Status

 

 

Green

Ready to scan or scanning

 

 

Green (flashing)

Sleep mode

 

 

Orange

Ready to scan or scanning with warning *1

 

 

Orange (flashing)

Initializing

 

Sleeping with warning *1

 

 

Red

An error occurred *2

 

 

*1: The rollers need to be cleaned or replaced.

Refer to Maintenance Manual or Operating Instructions (CD-ROM) for the way of cleaning or replacing the rollers.

*1, *2: Check the status of the scanner using the User Utility. The User Utility is included in the CD-ROM.

11