Cleaning the Unit
3 Use the roller cleaning paper
≥ When wiping off the dirt, hold the rollers |
to prevent them from rotating. Wipe the |
rollers all the way around from one end to |
For roller cleaning, pull the belt in the direction of the arrow to rotate the rollers.
Paper feed roller
Image sensor covers
the other in the directions of the arrows |
shown on the diagram to the right. |
≥ Perform the retard roller cleaning only in |
the left direction. If cleaned in the right |
Drive rollers
A
Separation roller
direction, the roller may slip out of the |
proper position. |
≥ When cleaning the rollers in the back of |
the bottom image sensor cover (rollers of |
part A), do not touch the tip of the plastic |
pointer (black) in the back of the unit. |
Set the paper path selector as shown |
below. |
Paper path selector
The paper path selector is located on the left side of the scanner.
Warning:
When the tip of the pointer is raised, the tip may cause an injury.
Paper path
selector
Pointer
≥The image sensor covers may be very hot after scanning a lot of documents.
Never touch the image sensor covers or surroundings directly.
Free rollers
Free rollers
Free rollers
Pointer | Retard rollers |
Drive rollers | Drive rollers |
Belt |
|
Conveyor rollers | Free rollers |
Left side view
≥Wipe in the direction of the arrows.
Other rollers | Retard rollers |
24