Repacking Instructions

It is highly recommended that you keep the original carton and ALL packing materials. If you need to transport or ship your scanner, please follow these instructions.

≥Please use the original carton and all of the original packing materials.

≥Improper repacking of the scanner may result in a service charge to repair the unit.

≥The scanner should be handled in the correct (horizontal) position.

Materials Required :

≥Original Scanner Carton & Packing Materials

≥Shipping Tape and Scissors

1

Disconnect your scanner from the electrical outlet and the interface cable.

2

Fold the plastic part of the exit stopper and put the exit stopper into the exit extension

 

tray. Slide the exit extension tray into the pre-imprinter door if it is pulled out.

3

Open the pre-imprinter door and tighten the screw.

 

 

 

 

 

 

Pre-imprinter door

 

 

 

Screw

 

 

 

 

 

4 Pack the scanner.

≥ CD-ROM 1 piece Operating Instructions

Driver Software

Power Cord

USB cable

≥ Blower

Joint

≥ Installation manual ≥ Maintenance manual ≥ Roller cleaning paper

(3 pieces)

≥ Shading chart

33