1. Introduction and Installation
15

1.8 Recording paper

The paper input tray unit can hold:
Up to 250 sheets of 60 g/m2 to 75 g/m2 paper.
Up to 230 sheets of 80 g/m2 paper.
Up to 200 sheets of 90 g/m2 paper.
LPlease refer to page 94 for information on recording
paper.
LThe unit is set for printing A4 size paper by
default. If you want to use letter or legal size
paper, change the setting (feature #380 on page
56).
1Pull the paper input tray (1) completely out.
2Pinch the front side of the recording paper guide
(1), then slide it to match the paper size mark.
Pinch both sides of the recording paper guides (2),
then slide them to match the paper size mark.
3Before loading a stack of paper, fan the paper to
prevent paper jams.
4Load the paper, print-side up (1).
Important:
LPush and lock the plate (2) in the paper input
tray, if it is lifted.
LMake sure that the recording paper guides (1)
are at the paper size mark and the recording
paper is under the paper limit mark (2). The
paper should not be loaded over the snubbers
(3).
1
1
LTR
LGL A4
A4 LTR
LGL
2
2
2
1
1
3
2
3
1
FLB882CX-PFQX2773ZB-OI-en.book Page 15 Friday, October 5, 2007 11:45 AM