10. Useful Information
70
10.2 Status of the unit
10.2.1 Using Remote Control
You can easily operate the following functions from your
computer.
– Programming the features (page 55)
– Storing, editing or erasing items in directories (page
40)
– Storing or erasing items for broadcast transmission
(page 42)
– Viewing items in the journal report (page 40)
– Storing the journal report as the computer file
– Viewing items in the Caller ID list (page 50)
– Storing caller information into directories (page 52)
– Storing the Caller ID list as the computer file
1Start Multi-Function Station. i [Remote Control]
LThe [Multi-Function Remote Control] window
will appear.
2Select the desired tab.
LThe latest data in the unit will be displayed.
3Perform the desired operation.
LFor details about each function, click [Help].
LTo stop the operation, click [Cancel].
4[OK]
LYou can also click [Apply] to continue the next
operation without closing the window.
5Enter the password (feature #155 on page 56). i
[OK]
LThe new data will be transferred to the unit and
the window will close.
Note:
LSome of the features cannot be programmed from
your computer.
LFor details, see the help file by selecting [p] from
Multi-Function Station.
10.2.2 Using Device Monitor
You can confirm the setting information and current
status of the unit from your computer.
1Start Multi-Function Station.
2[Utilities] i [Device Monitor]
LThe [Device Monitor] window will appear.
3Confirm the status of the unit.
[Status]: Current status of the unit
Note:
LAdditional information (toner and recording paper
status, unit information, etc.) will be displayed in
[Status] tab by clicking [Advanced Information].
LThe status of the unit will be updated by clicking
[Refresh].
LIf a printing error occurs, the Device Monitor will be
started automatically and display the error
information.
LFor details, see the help file by selecting [p] from
Multi-Function Station.
10.2.3 Using the web browser (LAN
connection only)
You can confirm the setting information and status of the
unit from the web browser.
1Start Multi-Function Station. i [Utilities] i
[Embedded Web]
LYou can also access the unit by entering its IP
address on the web browser.
2Select the category from the menu bar.
[Status]: Toner and paper information, etc.
[Device]: Current status of the unit, etc.
[Network]: Network information, etc.
LWhen you select [Device] or [Network], you
can change which features are displayed by
clicking the feature tabs at the top of the right
frame.
3Confirm the status of the unit.
Note:
LThe status of the unit will be updated by clicking
[Reload].
10.3 Changing the default output
tray
To change the default output tray when printing, proceed
as follows.
1[Start]
2Open the printer window.
For Windows 98/Windows Me/Windows 2000:
[Settings] i [Printers]
For Windows XP Professional:
[Printers and Faxes]
FLB88X
FLB882CX-PFQX2773ZB-OI-en.book Page 70 Friday, October 5, 2007 11:45 AM