7. Caller ID

51

7.2 Viewing and calling back

using caller information

Important:
LCalling back will not be possible if the caller
information does not include a telephone
number.
LIf the area code of the received telephone
number is the same as yours, the area code may
need to be deleted before calling back. This may
only apply to some areas. To edit the number, see
page 51.
1{CALLER ID}
2Press {V} to search from the recently received caller
information.
LIf you press {^}, the display order will be
reversed.
LTo send a fax, see page 39.
To change the way caller information is displayed
Press {CALLER ID} repeatedly after step 2.
Example: SAM LEE
11:20 20 Jul.,

b

3456789012
11:20 20 Jul.,

7.2.1 Symbols and operations for caller

information

What “,” means
,” on the display means the call has already been
viewed or answered.
To stop viewing
Press {STOP}.

7.3 Editing a caller’s telephone

number before calling

back/storing

The caller’s telephone number, which is sent to your
telephone from your local telephone exchange, includes
0 and an area code prefix. For local calls, 0 and the
area code prefix can be omitted (For New Zealand users
only).
1{CALLER ID}
2Press {V} or {^} repeatedly to display the desired
entry.
3Press {CALLER ID} to display the telephone
number.
4Press dial key (0 to 9) or {*} to enter the editing
mode and edit the telephone number.
LTo send a fax, see page 39.
Note:
LThe edited telephone number will not be saved in the
caller information. To save in the directory, see page
52.
To correct a mistake
1. Press {<} or {>} to move the cursor to the incorrect
number.
2. Press {STOP} to delete the number.
3. Enter the correct number.
To delete a number
Press {<} or {>} to move the cursor to the number you
want to delete and press {STOP}.
FLB882CX-PFQX2773ZB-OI-en.book Page 51 Friday, October 5, 2007 11:45 AM