9. Programmable Features
65

9.6 Scan features

Feature/Code Selection
Setting the scan mode for
Push Scan
{#}{4}{9}{3}
{1} VIEWER (default): The scanned image will be displayed in the [Multi-
Function Viewer] window.
{2} FILE: The scanned image will be saved as a file.
{3} E-MAIL: The scanned image will be saved for e-mail attachment.
{4} OCR: The scanned image will be displayed in the OCR window.
Holding the previous
scanning parameter for Push
Scan
{#}{4}{9}{4}
{0} DISABLED (default): Deactivates this feature.
{1} ENABLED: The unit will hold the previous scan settings for each mode of
push scan; scan type, resolution, file format, brightness, contrast, scan size.
SMTP setting for scan to e-
mail (via e-mail server) (LAN
connection only)
This feature can be programmed only by the web browser (page 68).
Registering the scan to e-mail
destinations (via e-mail
server) (LAN connection
only)
LThis feature can be
programmed only by the
web browser.
When you send scanned files via e-mail server, you can register e-mail
destinations (up to 30 destinations) to the unit using the web browser in
advance.
1. Start Multi-Function Station.
2. [Utilities] i [Embedded Web] i [Device Configuration]
3. Type “root” as the user name, then enter the password (feature #155 on
page 56). i [OK]
4. Select the [SCAN FEATURE] tab.
5. Click [Edit] next to [SCAN TO E-MAIL].
6. Click [Edit] next to the desired scan to e-mail user.
7. Enter name and e-mail address, and then select the station key number
from the drop-down list if necessary. i [Submit]
8. Close the web browser.
FLB882CX-PFQX2773ZB-OI-en.book Page 65 Friday, October 5, 2007 11:45 AM