9. Programmable Features
61
Setting friendly reception
{#}{4}{3}{8}
To receive a fax automatically when you answer a call and hear a fax calling
tone (slow beep).
{0} OFF: You have to press {START} for fax reception.
{1} ON (default): You do not have to press {START} for fax reception.
Setting the output tray to use
for faxing
{#}{4}{4}{1}
You can select the output tray that will be used for printing received faxes.
{1} #1: Upper output tray (Up to approx. 100 sheets)
{2} #2 (default): Lower output tray (Up to approx. 50 sheets)
Note:
LLists or reports printed by pressing {HELP} (page 20) or {MENU} (page 93)
will be stacked on the upper output tray.
Receiving a fax into the
computer
{#}{4}{4}{2}
If you wish to receive a fax into the computer, activate this feature and run [PC
FAX] from Multi-Function Station.
{0} OFF: Deactivates this feature.
{1} ALWAYS: If the unit recognizes the connection to the computer, it will
transfer a received document to the computer. If the unit cannot recognize the
connection, it will store a received document in the memory once, then transfer
the data after recognition of the connection.
{2} CONNECTED: If the unit recognizes the connection to the computer, it will
transfer a received document to the computer. If the unit cannot recognize the
connection, it will print out the data.
Note:
LThe default may vary depending on feature #114 setting.
Setting the computer for PC
fax reception
{#}{4}{4}{3}
To select the computer that will be used for receiving a fax. See page 23 for
details.
Resetting fax features to their
default settings
{#}{4}{5}{9}
{0} NO (default)
{1} YES
To reset the fax features:
1. {MENU} i {#}{4}{5}{9}
2. Press {1} to select YES. i {SET} i {SET} i {MENU}
Note:
LThe PC fax reception (feature #443 on page 23) will not be reset.
Feature/Code Selection
FLB882CX-PFQX2773ZB-OI-en.book Page 61 Friday, October 5, 2007 11:45 AM