Features Summary
51
The unit provides various programming features. Program the desired settings by referring to the
programming tables (p. 52–56).
1Press p.
Display:
2Select the feature you wish to program.
For basic features (p. 52, 53):
Rotate nuntil the desired
feature is displayed.
For advanced features (p. 54–56):
Rotate nuntil the following is
displayed:
then press wand rotate n
until the desired feature is displayed.
3Press w.
The current setting of the feature will be
displayed.
4Rotate nuntil the desired setting
is displayed.
This step may be slightly different
depending on the feature.
5Press w.
The setting you selected is set, and the
next feature will be displayed.
6To exit programming, press p.
ADVANCED MODE
SYSTEM SET UP
Programming by entering the program code
number directly
You can select a feature by directly entering the
program code (# and 2-digit number) instead of using
nin step 2.
1. Press p.
2. Press #and the 2-digit code number.
3. Follow steps 3 to 6 above.
See programming tables for code numbers
(p. 52–56).

Programming!

JOG DIAL SET
MENU

General programming method

To cancel programming
Press pto exit the program.