80

Copying

Making a copy!

The unit can make single or multiple copies (up to 99). Any transmittable document (p. 49) can be copied.
1Open the document feeder tray.
2Adjust the width of the document guides to the size
of the document.
3Insert the document (up to 15 pages) FACE DOWN
until the unit grabs the document and a single beep
is heard.
Display:
Make sure the handset is on the cradle.
4If necessary, press (RESOLUTION) repeatedly to
select the desired setting (p. 43).
5Press (START/SET/COPY).
6Enter the number of copies (up to 99).
7If necessary, choose an enlargement/reduction rate
by rotating (JOG\DIAL). See next page.
8If you want to print collated copies, press
(COLLATE) until the following is displayed (see
next page).
9Press (START/SET/COPY).
OR
Press (QUICK\SCAN) if you want to remove the
copy document for other uses.
The unit will feed the documents and scan them
into memory, then start printing.
COLLATE=ON
NUMBER=1 [100%]
STANDARD
Document guides
Document
feeder tray
(RESOLUTION)
(START/SET/COPY)
(STOP)
FACE DOWN
(JOG\DIAL)
(COLLATE)
(QUICK\SCAN)

To stop copying

Press (STOP).
Note:
While scanning, do not move the pages
which have already ejected. A paper jam
may occur. Allow the scanning process to
finish before viewing documents.
If a resolution is not selected, FINE
resolution will automatically be selected.
Once copying has started, the resolution
cannot be changed.
You can make or receive a voice call while
making copies.
After copying, the enlargement/reduction
rate setting will return to “100%”.
Manual feeding is not available when
making a copy.