REDIAL
L
Lift handset
or press
SP-PHONE
Press
REDIAL
.
Description
The last phone number dialed on an outgoing
call (CO line) can be redialed.
Operation
1.
2.
0
0
Lift the handset or press the SP-PHONE
button.
Press the REDIAL button.
You may press the CO button to select the
CO line directly after lifting the handset or
pressing the SP-PHONE button.
You may dial 8 and the trunk group number
(1 through 8) to select the trunk group
directly after lifting the handset or pressing
the SP-PHONE button.
Conditions
Up to 32 digits can be stored and redialed.
The “‘$ , cr#7’ or “PAUSE” button can be registered
as 1 digit.
When using the KX-T123235, one pressing of
the REDIAL button:
l
0
When using the handset; redial once
When using hands-free; redial up to 15
times (Automatic Redialing) within
1 O-minutes.
To cancel automatic redialing, press the
FLASH button.
When calling or while in the conversation
mode, pressing the REDIAL button will
cause the redial to operate after about 3
seconds.
Dial You will ’ Dial “1” and
extension hear a wait for an
number busy tone ’ answer
(100 through 199)
Description
If the extension you have dialed is busy, you
can inform the extension that another
intercom call is waiting by three beeps.
If the extension you have dialed is KX-1123235,
you can inform the extension through the speaker.
See “Off Hook Call Announcement” on page 4-23.
Operation
1.
Lift the handset or press the SP-PHONE
button.
2. Dial the extension number.
3. When you will hear a busy tone, dial (1) and
wait for an answer.
Conditions
l
To answer your signal, see “Call Waiting”
on page 4-20.
0 If the other party is setting “Call Waiting
Tone-From Extension Deny” on page 4-43
or is using a data terminal equipment, you may
not be able to use this feature. A reoder tone
is heard after dialing 1. i
4-8